アートワークを確認するには画像をクリックしてください
Product Introduction
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Vichnet Machine Guarding Accessories | |||||
Product |
Model |
Surface |
Desp. |
Thickness |
Kits |
Frame Fixing Clamp |
KKFC-EZ-SET |
Electro galvanized |
Guides the panel into the correct position when assembling |
2.75mm |
Fixing Clamp*1, 8*12 Flange bolt*2 |
Mesh Panel Door Hinge |
KKHG80-65-5.5MM-SET |
/ |
Fixing the post of door and mesh panel |
5.5mm |
M8*50 Countersunk bolt*6, M8 Flange Nut*6 |
Post Leg Kit |
KKFT-SSC-PTblk-SET |
Powder Coating |
Fixing the post of door and mesh panel |
2mm |
Post leg*1, M10*70 anchor*4 |
Top Frame |
KKDR-PTblk-20-50-1.5-1000 |
Powder Coating |
Mounted on 2 posts |
1.5mm |
Top Frame*1 |
Top Frame Fixing Kit |
KKDR-PTblk |
Powder Coating |
Fixing the post and top frame |
3mm |
Top frame kit*1, M8*30 Flange bolt*1 |
Post Joint |
KKDK-LZDJJ-400-YELLOW-SET |
Powder Coating |
Connecting the posts |
3mm |
M8*20 Flange bolt*8, M8 Flange nut*8 |
Support Wheel Kit |
KKDP-1.5-PTblk-SET |
Powder Coating |
Supporting the door moving |
2mm |
Support bracket*1, Brake caster*1, M8*10 Countersunk Bolt*2, M8 Flange Nut*3 |
Holder |
KKCF-EZ-SET |
Electro galvanized |
Locating mesh panel and post |
2.7mm |
Door holder*1, M8x30 Countersunk Bolt*1, M8 Flange Nut*1 |
Edge cover |
KKEP-HLHB-C-1000-PTblk |
Powder Coating |
Edge protection after cutting mesh panel |
2mm |
/ |
Slide Rail |
KKSK-YDHG-76x1000-SS304-SET |
Nickel Plating |
Moving door |
2mm |
Slide Rail*2 |
Door Handle |
KKDR-HD-SET |
Powder Coating |
Opening the door |
/ |
Door handle*2, M6x25 Flat bolt*2, KK34 Top coupler*2, M6 Flange nut*2 |
Installation ways
Applications
http://ja.vichnetcabletray.com/